User`s guide

11 VIDEOMAN
.VIDEOMAN Digital.
(Notice – If DVR server is running on Windows 2000/XP “Incoming connection” must be
created in “Network connection”. On Windows98, “Dial-up connection server” must be
created. Make password(Ras user and password) in Windows 2000/XP, but do not
make the password in Windows 98. More detail about making dial-up connection is
described in Net User Guide.)
-- IP/Num(Code) : Give IP address, phone number(modem) or Code(IP server) for remote
client (system with Net program) to send Notification.
- Use IP Server : In case of using IP server, check the box.
Since IP Server uses Code to identify DVR system rather than its IP address, it is possible to
connect DVR system with dynamic IP address. (Code name must be unique for each DVR
system)
 IP Server : IP address of system in which IP Server program is running
(Server must use static IP.)
-- Notify interval : Update DVR system’s IP address to the IP server once in every
interval period.
ㆍ Log Write
: Record a Log file(Log can be viewed with Log Viewer in Utility.)
- System log : Time information of Main, Search, Setting start /end .
- Sensor log : Log for sensor detection.
- Motion log : Log for motion detection.
- User log : Log information of User login.
ㆍ Screen
: Initial setting for main program.
- Initial screen : Number of camera shots that will be displayed when system is started.
- Normal, Large, Full : Size of the camera shots displayed when system is started.
- CCTV auto switching interval: The amount of time each camera shot will be displayed
intermittently through the Composite-Out port.
-- Normal : Displays the current camera shots of the monitor.
-- 1 View : Sequential switching of each camera .
-- 4 View : Sequential switching of 4 cameras.
-- (CAP and MPG series only support 1 view sequential switch.)
- PC Screen auto switching interval : It sets the time between one split screen shot and the
next, only when the auto switching button function is activated
ㆍ Auxiliary Functions