User manual

ManualsBrandsVideology ManualsComputer equipment45M26

7. OSD Architecture

Doc # INS-45M26 Issue Date: 12/05/07

Revision:A Page 8 of 16

7.1. Video Function

Press SOURCE to select a video input:

Press the FUNCTION button to bring up the OSD Menu.

Press again to select FUNCTION, then press

SELECT twice to enter submenu.

As shown, press keys to adjust selection.

Note: In remote control, press key to adjust.

(After adjustment, the monitor will store new settings)

Contrast

Permits adjustment for contrast between light or dark

areas of the picture.

Brightness

Adjusts the overall picture shade and brightness.

Tip: Use the Brightness to make details in the dark

areas of the picture to be just visible, and contrast to

brighten the picture without causing video noise and foreheads to turn white.

Hue

Adjust all the colors on the screen, but is most noticeable to the eye in reds and yellows,

and is also usually set for pleasing face tones.

Note: Appears in NTSC mode only.

Saturation

Adds coloring to the black and white picture content (of a color signal), and is usually set for

viewer's preference in color saturation.

Sharpness

Sets the desired sharpening enhancement to the picture.

Color Temp

Adjust the screen color temperature 9300/ 6500/ 5800.

Display Ratio

Select between 16x9 or 4x3.

Video Scan

Adjust the screen size to Normal/ Over/Under scan.

Volume

Control built-in speakers' output Volume.

Sub-Menu

Video