User manual

Doc # INS-45M104 Issue Date: 5/15/2012
Revision: A Page 6 of 16
6. Operating Instructions
Figure 1. Front and side Panel
6.1. Key Board Control
1. Power
Monitor power ON / OFF. At OFF mode, monitor will be at standby status
Green Light -- Power On
Red Light -- Standby mode
2. Adjust
Increase the value on the OSD menu or turn ON / OFF function
3. Adjust
Decrease the value on the OSD menu or turn ON / OFF function
4. Item/Select
Choose sub menu Hot key selection for:
Brightness/ Contrast/ Backlight/ Sharpness/ Hue/ Color/ Volume
Press again to enter selected option
5. Menu/Function
OSD menu ON / OFF control
6. Source
SDE: Select input signal from AV1, S-Video or PC.
SHDE: Select input signal from AV1, AV2, S-Video, PC, HD.
Used as "Return/Exit" function in OSD menu
***Push “Menu” and “Up” into key-lock mode, and push again into unlock.***