User manual

Doc # INS-45M104 Issue Date: 5/15/2012
Revision: A Page 11 of 16
6.4.3.3. PIP
Use Select (▲▼) button to select the item to be adjusted. Push
Menu
to confirm the selected item, use
Select (▲▼)
button to adjust and then push <Source> button to return.
MENU
FUNCTION
PIP Source
Use Select (▲▼) button to select the source of sub-picture.
PIP Size
Use Select (▲▼) button to select the size of sub-picture Small/Medium/Large/1+1/Off. Off
means PIP function is turned off.
PIP Swap
Push <MENU> button to switch the main picture and sub-picture. (This function works only
when sub-picture exists )
PIP Position
Use Select (▲▼) button to select the position of sub-picture(0~5)
4 corners and center.(This function works only when sub-picture exists)
6.4.3.4. Display
Use Select (▲▼) button to select the item to be adjusted. Push
Menu
to confirm the selected item , use
Select (▲▼)
button to adjust and then push <Source> button to return.
(Mode: AV, S-VIDEO, HD) (Mode: PC D-Sub)
MENU FUNCTION MODE
H. Position
Use Select (▲▼) button to adjust the horizontal position of the image.
all
V. Position
Use Select (▲▼) button to adjust the vertical position of the image.
all
Image Ratio
Use Select (▲▼) button to select the image ratio.
PC mode : 4:3/16:9
AV/S-VIDEO mode : 4:3/16:9/14:9/Movie/Panorama
all
Image
Optimize
Push <MENU> button to enter the sub-menu and use
Select (▲▼) button to
adjust/select
all
Phase
Use Select (▲▼) button to increase/decrease the noise on the screen.
PC
Clock
Use Select (▲▼) button to increase/decrease the snowflake noise on the screen.
PC
Auto Adjust Push <MENU> button to adjust the best image. PC