Operation Manual

4
Controls and Connectors
This section provides information on the controls and connectors available on the front and back panels of your DRX-601E/ES.
For information on the remote control, see page 8.
Tuning
selects the
digital radio service,
see page 6
Front Panel
Rear Panel
Autotune
provides one
touch tuning,
see page 6
Info
changes the
information mode of
the display, see page 7
Display
changes the
main display mode,
see page 7
Brightness
changes the
display brightness
Remote sensor
picks up the infrared
signal from the remote
LCD Display
backlit LCD
display
Remote LED
indicates remote
control activity
Secondary LED
indicates whether
secondary services
are available,
see page 6
Stereo LED
indicates stereo
service being
received, see
page 6
Power
on/off switch
and indicator LED
AERIAL socket
S/PDIF co-axial
and optical digital
outputs, see page 5
RDI Receiver Data
Interface socket,
see page 5
INPUT loop through
for AM/FM tuner
OUTPUT line-level
stereo (analogue)
output to amplifier
Power Lead for
connection to wall
outlet