Operation Manual

8
Using the remote control
This section provides information on using the remote control. The infrared remote control provides access to the main functions of
your DRX-601E/ES and also advanced facilities such as presets and dynamic range control. Before using your remote, insert the supplied
batteries. Aim the remote control at the sensor on the display panel on your DRX-601E/ES.
Preset buttons
The numbered buttons (1-9) and the STORE button enable you to store your favourite radio
services for one-touch access.
To store a service
While listening to the service you want to store.
1. Press the STORE button.
The display on your DRX-601E/ES shows 1-9?
2. Press a numbered button to store the service under that number.
To recall a previously stored channel
Press the numbered button under which you stored the service.
DRC button
The DRC Dynamic Range Control button enables you to alter the dynamic range of the received
audio (dependent on broadcast material) by making the quieter sounds in a broadcast more
audible. This may be useful in noisy environments or particularly quiet parts of programmes.
Press the DRC button to check whether DRC is available for the current service then press the
DRC button again to toggle DRC on or off. The default setting is off.
MUTE button
The MUTE button is a quick way of reducing the output volume from your DRX-601E/ES.
1. Press the MUTE button to mute the sound.
The display on your DRX-601E shows MUTE.
2. Press any key on the remote control or main unit to remove the mute and return to the
previous listening volume.
DISPLAY button
The DISPLAY button enables you to change the display mode on your DRX-601E/ES. This
button performs the same function as the Display button the main unit. See page 7 for details.
Press the DISPLAY button and repeat or hold down to cycle through the four display options.
INFO button
The INFO button enables you to change the information mode on your DRX-601E/ES. This button
performs the same function as the Info button on the main unit. See page 7 for details.
Press the INFO button and repeat or hold down to cycle through the two information modes.
Service select buttons
The !" and SELECT buttons enable you to cycle through and select services. Together, these
buttons perform the same function as the large tuning knob on the main unit.
1. Press and release or hold down the ! or " button to cycle through the stored services.
2. The bottom line of the display on your DRX-601E/ES shows the service names.
3. Press the SELECT button to select and listen to the displayed service.
PRI/SEC button
The PRI/SEC button enables you to select between the primary and secondary services where
secondary services are available. If a secondary service is available for the current service, the
Secondary LED will light up on the front of your DRX-601E/ES. See page 9 for an explanation of
primary and secondary services. Press the PRI/SEC button and repeat or hold down to cycle
through the available services.