FlexCam® iCam Digital User Manual 910-171-102 910-171-102-PAL 5615 Raytown Road • Kansas City, MO 64133 U.S.A. Tel.: 816-353-4787 • Fax: 816-358-5072 email: flexcam@ken-a-vision.com • www.ken-a-vision.
Table of Contents Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Service and support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product returns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Handling the camera. . . . . . . . . . . . . . . . . . . .
Troubleshooting Introduction Troubleshooting. Introduction I’ve installed the FlexCam iCam Digital, but the picture doesn’t appear. Connect the FlexCam iCam Digital to the computer using the supplied USB cable. Check to see that the video source (S-video or composite) is set correctly. Ensure that the USB port is enabled in your computer’s BIOS and in the Windows Control Panel/System Device Manager.
Introduction Important safeguards Before operating the FlexCam® iCam Digital camera, please read the entire manual thoroughly. The FlexCam iCam Digital was designed, built and tested for use indoors. Using a power supply other than the one provided or using the camera outside could damage the camera or peripheral equipment and/or create a potentially unsafe operating condition. • Do not operate the camera if the power cord is damaged or if the camera has been dropped or damaged.
Getting Started Introduction Unpacking Getting Started Carefully remove the FlexCam® iCam Digital, cables and power supply from the packaging. Ensure that you received the following items: Connections You can connect the FlexCam® iCam Digital to a TV, a VCR or an LCD projector using the included 12’ S-Video cable. If your video display device requires a composite signal, use the provided S-Video to composite adapter. FlexCam® iCam Digital User Manual To connect to a TV, VCR or projector 1.
Introduction Introduction Product overview Application examples C D With simple S-Video and USB connections, the FlexCam® iCam Digital is the perfect addition to any classroom. You can connect to a PC or a Mac using the USB connection to add still images or movie clips to web sites, reports, and presentations. The S-video connection allows you to display images and objects as well as share documents on a TV or LCD projector. You can also use the camera with a microscope to capture lab experiments.
