User's Manual

CHAPTER 3. OPERATION | 7
3.5.2 Record
- Time stamp: Time Stamp will show up while
recording from your camera(s)
- Camera stamp: Camera Stamp will show up while
recording from your camera(s)
- Record Path and Mode:
(1) Linear mode, it will allow you to keep recording
until there is only about 12Mbs of free space
left on your Hard Disk
*Recording requires at least 30Mbs of free space
left on your Hard Disk!*
(2) Circular mode, it will allow you to keep
recording by going back on your current
recorded file and overwrites it as needed, if there’s not enough free space on your
Hard Disk.
(3) You can change your Default saving path of your recorded videos if you wish to do so. Change
the path by typing in the text box, or by selecting a new folder by pressing the [...] button located
on the right of the path.
Click on OK to accept and save your settings. Click on Cancel to return to WiDiGuard main screen
without saving your settings.
3.5.3 MotionDetector
- Select camera for Motion Detector:
- Here you can select any camera to use Motion
Detector recording.
- After select camera for Motion Detector, you can
scroll the particular areas (up to 4 rectangles)
for Motion Detect.
- To cancel the particular area of Motion Detector Function:
(1) Select the camera I ~ IV under the Motion Detector Option to cancel the whole particular
areas of each camera.
(2) Right click on screen and select Delete One Motion Rectangle to undo the particular areas
of each camera.