User guide

Connecting External Equipment to the TV
PC IN [PC] / [AUDIO]: Connect to the video and audio output jack on your PC or Laptop.
1. Press the SOURCE key on the remote control
2. Use the up/ down ARROW keys to select VGA
3. Press OK to display PC
See – PICTURE MENU section (page 17) for more information on VGA mode and fine tuning your display to get the
most out of your display for PC/ Laptop monitoring.
SCART 1/ 2:
Connect to a SCART connection on the
output device you wish to display through
the TV. Used to connect a VCR or Set top
box to the TV with this type of lead. SCART
can carry – Composite, S-Video and RGB
signals- Standard definition only.
USB: You can connect USB devices to your TV via the USB input. This feature allows you to display/
play Jpeg, MP3 and other media files (see table on following page) stored on a USB stick.
CAUTION: Quickly plugging and unplugging USB devices can cause physical damage to the USB
player and more likely the USB device itself. Carefully plug the USB storage device into the USB
input on the TV – the device will only fit one way – make sure you attach the correct way – do not
force
into
the
opening
–
you
shouldn’t
have
to
.
25
USB
force
into
the
opening
–
you
shouldn’t
have
to
.
Once connected –
1. Press SOURCE on the remote control.
2. Use ARROW keys up/ down to select “Multimedia” on the Main Input Source menu.
3. Press OK to confirm.
The multimedia screen shows three icons – Picture, Music and Video – Using the ARROW keys – select the type of file
you want to play – e.g. – “Picture” if you wish to view jpeg images. The folders and files of the card will be displayed on
screen as icons (as per a pc) – select the file or folder you wish to view. NOTE – YOU MUST SELECT THE TYPE OF MEDIA
YOU WISH TO PLAYBACK on the first multimedia screen e.g. “Movie” for movie files – otherwise they will not PLAY!
Press EXIT go back a step, Press OK to select a file etc,
MULTIMEDIA CONTROLS
Service Number 0845 293 7697
The Colour Keys operate preset options as prompted on screen – e.g. – slide
duration on jpeg playback, or picture mode in mpeg playback etc. If “picture
mode” is indicated yellow on screen – press the yellow key on the remote to
operate that feature etc.
PLAY/PAUSE
To PLAY and PAUSE a movie file.
REPEAT
Press this key to display repeat modes status (OFF / REP SINGLE / REP ALL)
and Repress the key to change the status.
REP SINGLE : repeats the playback one time in particular folder.
REP ALL : repeats the playback in all folders.
STOP
Press this key to stop playback