Owner`s manual

MXR-5838 Series Manual Rev. B 2007
8
Channel Selection Receiver
For the wireless link to work, both devices must have the same channel selected.
1. Attach the included rubber duck antenna to the TNC connector on receiver.
2. Power-UP the Receiver using the included power supply & switch to “ON”
3. Set the desired channel by turning the rotary switch to channels from 1 – 4
4. Receiver channels from 5 to 8 will only work with VideoComm Transmitters devices
capable of 8-Channels. The MXR-5838c has only 4 channels of selection.
5. The receiver must be set to the same channel as the camera.
6. We strongly recommend that you do not adjust the video gain adjustment without first
consulting a member of the VideoComm Technologies Tech Support Team.
Receiver Channels
Channel # 1 5.733 GHz Channel # 6 5.828 GHz
Channel # 2 5.752 GHz Channel # 7 5.847 GHz
Channel # 3 5.771 GHz Channel # 8 5.866 GHz
Channel # 4 5.790 GHz Channel # 9 5.866 GHz
Channel # 5 5.809 GHz Channel # 0 5.733 GHz