Owner`s manual

MXR-5838 Series Manual Rev. B 2007
5
SYSTEM SETUP
Channel Selection Camera
For the wireless link to work, both devices must have the same channel selected.
1. Power-UP the Camera using the included power supply & switch to “ON”
2. Set the desired channel by moving the slide switch
3. The receiver must be set to have the same and matching channel as the camera.
4. Flip UP the directional antenna and pivot left or right to “aim” the transmitted signal in
the direction of the receiver. The outside “dotted” face of the antenna must be aimed.
5. Do not rotate the antenna more than 180 degrees, Left-OR-Right , from the center
position. Damage to the antenna may occur.
Channel # 1 5.733 GHz Channel # 6 N/A
Channel # 2 5.752 GHz Channel # 7 N/A
Channel # 3 5.771 GHz Channel # 8 N/A
Channel # 4 5.790 GHz Channel # 9 N/A
Channel # 5 N/A Channel # 0 N/A
Do not rotate the antenna
more than 180 degrees,
Left-OR-Right , from the
center position