Installation Guide

5.8GHz All Weather 8 Channel Series Manual Rev. E
Unused Grommet Seals
After video and audio cables are installed and terminated you may find there one or more cable glands are
not being used. If there are cable glands not being used this means that water can enter the enclosure, causing
damage. To prevent this from happening, VideoComm includes black plugs to seal off any unused cable
glands.
Turn cable gland counter clock wise to loosen. Use a Metric 22mm
wrench. (Closest Imperial Size – 7/8”)
From the inside of the enclosure, insert black plugs into
unused cable glands.
Using a Metric 22mm wrench (Closest Imperial
Size – 7/8”), turn the cable gland clock wise to tighten; this will
make a watertight seal. Do not over tighten.
IMPORTANT! Failure to tighten the cable gland may result in water