Specifications

LENEL
®
- A UTC FIRE & SECURITY COMPANY FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS
[PROJECT NUMBER]
[DATE]
[PROJECT NAME]
[PROJECT LOCATION]
[AUTHOR]
[FILE NAME]
INTEGRATED AUTOMATION INSTRUMENTATION & TERMINAL
DEVICES FOR ELECTRONIC SAFETY & SECURITY SYSTEMS
25 38 00 - 10
LENEL CONFIDENTIAL INFORMATION – For use by Lenel-authorized VARs, prospective or existing Facility Commander users
and their respective authorized consultants. All other third-party use is prohibited without Lenel’s written permission.
(iv) Disarmed.
(v) Unknown.
(10) Intrusion DGP.
(i) Initial State.
(ii) Bypassed.
(iii) Offline Alarm.
(iv) Tamper Alarm.
(v) Main Power Failure Alarm.
(11) Intrusion Input.
(i) Initial State.
(ii) Alarm.
(iii) Alarm Event.
(iv) Bypassed.
(v) Tamper.
(12) Intrusion Keypad.
(i) Initial State.
(ii) Duress Alarm.
(iii) Bypassed.
(iv) Offline.
(v) Tamper.
(13) Intrusion Panel.
(i) Initial State.
(ii) Duress Code Entered Alarm.
(iii) Offline Alarm.
(iv) Tamper Alarm.
(14) Monitor.
(i) Initial State.
(b) Device conditions represent the state of the alarm point.
(1) Set.
(2) Reset.
(3) Tamper.
4) Initial state icons shall indicate that there are no pending alarms for the
device.
c. Graphics Editor
1) Provide a tool to create graphic representations of facilities, system devices
and alarm conditions.
(a) Allow development of multiple layers within map drawings.
(1) Define map layers that can be turned on or off for viewing.
(2) Permit development of hierarchical arrangements associating
several levels of graphic maps.
(b) Allow commands to be issued from the graphic display.
(1) Provide and define hyperlinks that allow operators to traverse
through a series of maps.
(2) Select device icons from a device palette containing all user-
defined symbols in the system.
(3) Link device symbols to devices in the system database.
(c) Allow the user to update the symbols or the maps as desired.
2) Provide a tool to create base graphical maps.
(a) Draw graphic maps using on board drawing tools.
(b) Import JPG or GIF format graphic files.
(c) Import DXF R12 CAD drawings.
(1) Allow import of two-dimensional drawings.
(2) Allow import of drawings as a single object.
(3) Allow import of selected layers from a drawing.