UTC Fire & Security 9 Farm Springs Road Farmington, CT 06034-4065 FACILITY COMMANDER™ 2.2.3 A&E SPECIFICATIONS APRIL 2011 DIVISION 25 INTEGRATED AUTOMATION LEVEL 1 25 30 00 INTEGRATED AUTOMATION INSTRUMENTATION AND TERMINAL DEVICES LEVEL 2 25 38 00 INTEGRATED AUTOMATION INSTRUMENTATION AND TERMINAL DEVICES FOR ELECRONIC SAFETY AND SECURITY SYSTEMS LEVEL 3 25 38 00 NOT APPLICABLE LEVEL 4 25 38 00.00 NOT APPLICABLE LEVEL 5 25 38 00.00.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] TABLE OF CONTENTS PART 1 GENERAL .................................................................................................................................... 1 1.1 SUMMARY .................................................................................................................................... 1 1.2 REFERENCES .................................
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] SECTION 25 38 00 PART 1 GENERAL 1.1 1.2 SUMMARY A. Section Includes 1. Security Integration Command and Control Platform Performance Requirements B. Related Requirements 1. Integrated Systems and Options a. 27 51 23 Intercommunication and Program Systems b. 28 13 00 Access Control c. 28 20 00 Electronic Surveillance d.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] 1.5 FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] WARRANTY A. Warranty 1. Warrant system against defects and workmanship for minimum of (12) months, covering all parts and labor, after Owner acceptance. 2. Guarantee all application software/firmware remains current at all times. 3. Guarantee all application software/firmware is manufacturer supported. 4.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] PART 2 PRODUCTS 2.1 OWNER FURNISHED EQUIPMENT A. Host Server ***RECOMMENDED Windows/Linux*** 1. Intel CISC Based Server a. Dell PowerEdge 510/610/710 Server b. 2 x Intel Xeon Quad Core E5504 CPUs c. 4 GB RAM d. 4 x 146 GB 15K RPM SAS Disk Drives with RAID1 or RAID10 e. 1 Gbit Network Interface Card (NIC) f. DVD-ROM Optical Drive g.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] 3. 4. 5. 6. 7. 8. 9. 10. FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] 4 GB RAM 160 GB 7.2K RPM Hard Drive 1 Gbit Network Interface Card (NIC) 56K Modem DVD-ROM Optical Drive Redundant Power Supplies Graphical Monitor and Video Card Keyboard and Mouse C. Web Browser, Client Workstation ***RECOMMENDED *** 1. Dell Precision T3500 Workstation 2. Xeon E5506, 2.13 GHz, 4MB Cache 3. 3 GB RAM 4. 160 GB 7.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] 2. 3. 2.2 2.3 FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] Web Browser: Microsoft Internet Explorer 6.0 SP1, Internet Explorer 7.0, Internet Explorer 8.0 (required for Windows 7), or Mozilla Firefox 3.0 Other: Adobe Acrobat Reader SYSTEM A. Manufacturer 1. Provide all system software as a standard catalog product offering of a single manufacturer. 2.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] c. d. 4. 5. 6. 7. 8. 9. B. Satisfy requests from the system server for video tagging and video playback. Communicate with the System Server using industry standard communication protocols. e. Communicate automatically upon configuration in the system server. f. Remote servers shall not require a database or system backup. Web Browser Client a.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] d. FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] 9) Facilities Report. 10) Facility Memberships Report. 11) Logical Inputs Report. 12) Operators Report. 13) Servers Report. 14) Workstations Report. History Reports. 1) Alarm History Report. 2) Events Report. 3) Intercom Events History Report. 4) Intrusion Events History Report. 5) MEA Audit Events History Report. 6) Media Actions Events History Report.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] 2) 2. 3. [AUTHOR] [FILE NAME] Graphical user interface shall be English and [Spanish] [French] [Portuguese] [Dutch] [Italian] [German] [Russian] [Arabic] [Korean] [Japanese] [Chinese Simplified] [Chinese Traditional] Web Browser Client a.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] 3) [AUTHOR] [FILE NAME] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] (g) Intrusion devices. Develop symbol schemes to correlate device attributes and conditions. (a) Device attributes represent the type of alarm generated. (1) Door Access Point. (i) Initial State. (ii) Door Forced. (iii) Door Held. (iv) Door Pre-alarm. (v) Invalid Badge Alarm. (vi) Lost Badge Alarm. (vii) Suspended Badge Alarm.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] c. [AUTHOR] [FILE NAME] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] (iv) Disarmed. (v) Unknown. (10) Intrusion DGP. (i) Initial State. (ii) Bypassed. (iii) Offline Alarm. (iv) Tamper Alarm. (v) Main Power Failure Alarm. (11) Intrusion Input. (i) Initial State. (ii) Alarm. (iii) Alarm Event. (iv) Bypassed. (v) Tamper. (12) Intrusion Keypad. (i) Initial State. (ii) Duress Alarm. (iii) Bypassed.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] (4) (5) d. e. [AUTHOR] [FILE NAME] Allow imported layers to be deleted. Permit the re-import of a DXF file, without consequence to symbols previously place on the graphic display and linked to database objects. 3) Associate symbol schemes with access points and device types. Alarm Monitor 1) Display all active alarms real time in priority order.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] f. [AUTHOR] [FILE NAME] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] (c) Location. (d) Variable parameters based on event type. 5) Provide simple access to associated video clips. 6) Filter events by selecting the types to be viewed. Video Viewer 1) Allow retrieval of remote video for viewing on any workstation. 2) Allow simultaneous viewing by multiple operators on different workstations.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] (e) Location. Video Clip Storage. (a) Tag video clips automatically as a result of predefined events in the system. (b) Allow any subsystem alarm or event to be linked with a video clip. (c) Store all video tokens in primary system database. (d) Each video clip shall reference the date and time of the event in the token name.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] d. e. f. g. G. FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] Invalid badge Lost badge Suspended badge Unknown badge Digital Video Management: 1. Configure in accordance with client location size and geography a. Centralized 1) Install media server directly on system server 2) Single location or small site application b.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] (h) (i) (j) (k) (l) (m) (n) (o) (p) (q) (r) (s) (t) (u) (v) (w) (x) (y) (z) (aa) (bb) (cc) (dd) (ee) (ff) (gg) (hh) (ii) (jj) (kk) (ll) (mm) l.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] 2) 3) 4) 5) 6) 7) FACILITY COMMANDER™ v2.2.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] 3. 4. J. FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] f. Outputs g. Allow assignment to one or multiple facilities Monitor and report alarm conditions: a. Intrusion Detection Panel 1) Duress code entered 2) Main power failure 3) Panel offline 4) Siren monitor failure 5) Panel tamper b.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] PART 3 EXECUTION 3.1 3.2 INSTALLERS A. Contractor requirements: 1. Factory authorized representative for no less than two (2) years, recognized by the manufacturer of the specified system 2. Local installation and service organization 3. Provide three (3) references (minimum) whose systems are of similar complexity a.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] 3. B. 3.5 3.6 Control signal, communications, and data transmission line grounding shall be installed as necessary to preclude ground loops, noise, and surges from adversely affecting system operation. 4.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] 1. D. E. F. G. 3.7 Development of maps shall include the creation of icons for all doors, monitor points, and tamper circuits. 2. Owner shall provide AutoCAD .DWG or .DXF file floor plan drawings as the basis for the creation of maps. Owner, with the cooperation and assistance of contractor, will input the cardholder data for each access card.
® LENEL - A UTC FIRE & SECURITY COMPANY [PROJECT NUMBER] [DATE] FACILITY COMMANDER™ v2.2.3 GUIDE SPECIFICATIONS [PROJECT NAME] [PROJECT LOCATION] 1) 3. Hands-on training shall include the opportunity for each person to operate the system. 2) Hands-on training shall include practice of each operation that an operator would be expected to perform. c.