User manual

51
10.5 Alarm Search
Click the Alarm Search in the Alarm Management Interface shown in Figure 4-45.
Figure 4-45 Alarm search
Step 1 Choose the device on the left that you want to see the alarm information.
Step 2 Choose the alarm type by the bar Type.
Step 3 Choose the date.
Check the date on the calendar , change month, , change year.
This means the date is chosen. If the date with red colour means this day has alarm
video recorded.
Step 4 Video play.
After selecting the device and the date, the alarm file will be displayed below the Type.
And click to begin play video.
10.6 VHDIPL setup
Click the NVR Setup on the web browser enter the VHDIPL configure interface shown
in Figure 4-46. For a detailed setup please refer to chapter 9 VHDIPL setup.