User manual

44
Unlock the locked user
When logged on to the system, if the user inputs the wrong password more than 3 times,
then the system will lock the user, but only the administrator can unlock the user.
9.1.9 Date and Time Configuration
You can set the Date and Time and also the Date and Time format of VHDIPL.
Step 1 Setup > System Configuration > Date and Time,
Enter the date and time shown in Figure 4-36.
Figure 4-36 Date and Time configuration
Step 2 Input the correct time.
Step 3 Choose the date and time format which you want to use.
9.2 Camera management
In the camera management interface you can configure the parameters of the cameras
which have been added to the VHDIPL.
It is the same to configure the device from the VHDIPL and from the WEB. Please see
the VIPC-MB720 or VIPC-MD720 User Manual.