User manual

43
User setting
You can add and delete users. The users which have the privilege of system
configuration can unlock the system, it may be locked by inputting an incorrect
password more than 3 times.
Step 1 System configuration > Account > User
Enter the user interface shown in Figure 4-35.
Step 2 Add and delete user.
• Add user
1. Click add to call the add user interface.
2. Input the user name.
3. Click OK.
Finish the adding user, return to the previous interface.
Figure 4-35 User configurations
4. Configure the user password and privilege group.
5. Click Apply to finish the user adding configuration.
• Delete user.
1. Click delete to call the delete user interface.
2. Click yes to return the previous interface.
3. Click Apply once finished.