User manual

40
Figure 4-32 Schedule record configuration
Step 6 To enable the alarm record
• If you do not want to enable the alarm record, then just set the button to OFF.
• If you want to enable the alarm record, then set the button to ON.
Step 7 To enable the audio
• Slide the bar to on.
Step 8 To configure the storage policy, select either:
• When HDD is full, overwrite.
• Retention day time.
Step 9 Configure the HDD disk group.
There will be 2 HDD disk groups. You can set the recording to be recorded to the
different disk groups or you can set both HDDs to 1 disk group.
Step 10 Configure the record streams bit rates.
Step 11 Click Apply to save the configurations and exit the record policy interface.