User manual

39
Step 2 Enable the record (Enabled as Default)
Step 3 Please select √ on the cameras which you want to record, and also select the
corresponding stream parameters.
Step 4 Click more
The record policy configuration interface will pop up, shown in Figure 4-31.
Figure 4-31 Record Policy Configuration Interface.
Step 5 Configure Record Policy
When configuring the record policy, there are two policies, 24 x 7 or Schedule.
If you select record by schedule, you need to configure the schedule plan. Follow the
steps below.
1. Click to enter the schedule record configuration interface.
2. Configure the schedule for recording shown as Figure 4-32.
3. Click Apply to save.