User manual

36
Figure 4-27 Network Interface
Step 2 Configure the network parameters, reference the Table 4-4.
Table 4-4 Network parameters
Items
Introduction
How to configure
Get IP address
automatically
It will get the IP address from DHCP server
automatically.
Switch DHCP to on by
this button .
IP Address
It can configure the camera's IP address.
Default IP is
192.168.0.120
Subnet mask
Configure the subnet mask
Default address is
255.255.255.0
Gateway
Configure the Gateway address
Default is 192.168.0.1
DNS
Configure the DNS server address
Default is 192.168.0.1
Step 3
12. Click Apply, then a message saying "Applying succeeded" pops up then click ok.
13. If another window pop ups, then please confirm the parameters are all correct and
configure again.
9.1.5 Live video layout
You can configure the live video layout in order to call the live video quickly.
Live video layout can do the below operations: