User manual

9.1.3 System alarming

Select Setup > System warning > system warning

Enter the system warning shown in Figure 4-26.

Figure 4-26 System Warning Information.

Warning information searching steps.

Step 1 Select the warning type (Disk Alarm, Record Alarm, All).

Step 2 Input search begin and end time.

Step 3 Click , then the results will be displayed.

9.1.4 Network

You can check the Camera’s DHCP IP address, configure IP address, subnet mask,

gateway address, First DNS and backup DNS.

Make sure the camera's IP addresses do not conflict with any computers on the LAN.

Operates steps

Step 1 Choose configure > system configure > network

Enter the network configuration interface shown in Figure 4-27.