User manual

33
Figure 4-23 Add IP section.
2. Input the Begin IP address and End IP address and Port number.
3. Click Apply to finish the operation.
4. The system will search the IP cameras in the IP segment and it will show the results
as shown in Figure 4-23.
11. Add manually
1. Click button, to add cameras, shown in Figure 4-24.
Figure 4-24 Add cameras manually
2. Input the IP address and Port number.
3. Click OK button to finish the operation.
4. If such camera is available, then the adding result will be displayed below.
Step 3 Click button to call the interface shown in Figure 4-25.