User manual

32
• Hardware Version
• Software Version
• Channel Quantity
• Disk Quantity
!
Only the device name can be edited, other parameters can’t be edited.
9.1.2 Device Management
You can search, add, and delete cameras via Device Management.
Select NVR setup > Device Management
Enter the camera management interface, shown in Figure 4-22; it will list all the
cameras which are connected with the VHDIPL, and some basic information.
Figure 4-22 Device Management Interface
Search and add cameras.
To search and add cameras, do the following:
Step 1 Click the “add” button to call the camera searching interface.
Step 2 Add the cameras according to the IP address or add manually.
• Add IP address
1. Click Add in IP address, to call the IP adding interface shown as Figure 4-23.