User manual

27
7. Double click the network disc path list, select the backup path, click ok button save
and exit.
!
USB Storage device
1. Insert U disk or removable HDD to the USB interface.
2. The VHDIPL will detect the USB storage device automatically, after detection, it
will show USB storage device.
3. Right click menu to select unmount or formatting options on the U disk.
4. Double click the USB storage device path list, select the backup path, click OK and
exit.
Step 2 Configure the backup file options.
8. You can define the maximum size of an individual file.
9. Create the subdirectories, it can be created by the directories based on the network
cameras IP address or ID.
10. To combine the recorded video clips ensure the "Merging Recorded Clips" function
is ON.
Step 3 Select backup recording
Method one: Select the recording and backup during the playback process. Recording
backup control bar as shown in figure 4-18:
Figure 4-18 Recording Backup Control Bar
1. Click the Start button to start selecting the recording segment.
2. Select the recorded footage, press the left mouse button to move to the left or right
side to highlight the footage you want to backup.
3. Click Stop button to stop the selection, (You can also click the cancel button to
cancel the current selected video segment).
Click backup to start the backup.
Method two: In alarm searching, when you are playing the playback alarm triggered
footage, you can click backup to make the backup files.
Step 4 View backup file progress
Check the backup status in backup interface, indicates backup is in processing,
indicates wait for backup, indicates backup stopped, indicates backup failed,
means backup finished.
Step 5 On a computer
Enter the backup directory folder, enables the user to check all the backup files.
Enter the backup path folder to check the backup files, shown in figure 4-19.