User manual

18
Figure 4-9 Camera Search Interface
Click the button
To remove the camera in the camera list, click the check box
, select the camera
and then click delete to remove, shown in figure 4.7.
Area 6：Configuring the network cameras.
To view the status of the network camera, set the name of the network cameras, IP
address, video strategy, stream parameters, and motion detection parameters.
!
View the status of network cameras: online, not online, account errors.
1. To preview real time video click .
2. Modify the name of the network camera.
Enter the desired name of the device.
• Modify the IP address of the network camera.
1. Click the camera to modify the IP address, network cameras IP Settings, a dialog
box pops up.
2. Set the network camera IP specific operation methods and procedures, see chapter
9.1.4.
• Set the device stream.
4. Click stream information to pop-up the stream configuration dialog box shown in
figure 4-10.