User manual

16
VHDIPL, this means all cameras will have internal times to match the VHDIPL
time.
Area 2：Managing camera certification accounts.
The certification accounts used to log on to the network cameras. Only certified
network cameras can be added to VHDIPL system.
!
System cameras will have a default user account: admin and default password:
admin. Click to add a network camera certification account.
!
Click to select account to be deleted from the list.
Area 3：VHDIPL network configuration.
!
VHDIPL factory default IP address: 192.168.0.120
!
The basic network configuration can configure the IP address, subnet mask, default
gateway, DNS address and other parameters. Real-time display of the network
connection status and speed.
Area 4：Hard disk management.
!
Formating the hard disk will cause video loss, please use this feature with caution.
!
Always use the software function when removing hard drives and ensure that the
power is off.
Hard disk management：
!
To format the hard disk, click the format button, a pop-up prompts, click format. A
3TB HDD takes about 10 minutes to format.
!
Load or unload HDD. Do not pull out the hard disk unless you have click on
unload first.
!
To modify hard disk group, add disk 1 to disk group 1 and disk 2 to disk group 2,
or add disk 1 and disk 2 to disk group 1.
!
To view the status of the disk it will say one of the following; normal, abnormal,
unformatted drive or does not exist.
!
View the disk space and the total space.
Area 5：Select Network Camera
VHDIPL will automatically search for the network cameras.
!
When the number of network cameras is no greater than 4 units, the VHDIPL will
automatically add them to the management list.