User manual

12
Figure 4-5 Adjustment Monitor Setup
Step 2 Choose the type of resolution in the resolution drop-down box.
The VHDIPL will automatically switch to the selected resolution and show the
following dialog options Yes or Cancel.
!
If no selection is made within 10 seconds, the display will return to the previous
resolution.
!
If you select Yes then it will switch to the selected resolution.
!
If you select cancel the display will not save the configuration and go back to the
previous resolution.
Step 3 Adjust display.
If the monitor does not show the full screen ( does not appear at the corners) screen
adjustment is needed.
1. Click Adjustment button at lower right corner.
2. In the step of the drop-down box to choose the adjustment step.
Step size: The moving distance when adjusting screen each time, the greater
number the more moving distance, you can select larger step sizes to adjust quicker,
and then select the smaller step to adjust more accurately.
3. Use UP, DOWN, LEFT, RIGHT button to adjust the screen.
Step 4 Click the configuration interface to close.
Exit display interface
Back to Login interface