User manual

10
If the HDD fails testing the reasons may include the following：
!
Unformatted new hard disk, go to quick configure to format the hard disk drive.
!
Formatted hard disk drive, the VHDIPL supported file systems do not match.
!
Hard disk drive is damaged.
4.5 Shutdown
!
Shutdown process, the system prompts are off, do not cut off the power
!
Do not remove the power cables while the VHDIPL is still on.
!
If the device is logged into the main interface, you can click the top right
button and this will bring up the shutdown interface, shown in figure 4-4.