User manual

9
No.
Name
Description
9
Ground connect
Ground connect
10
DC48V Power
interface
DC48V.1.04A power input (Supplied)
4.4 First boot
!
Make sure that the VHDIPL has the correct amount of power.
If you want to use POE power supply, please plug in the DC48V power adapter,
supplied with the VHDIPL.
Once the VHDIPL starts and after the self test, (which takes about 2 minutes) the
results are displayed on the screen shown in figure 4-3.
Figure 4-3 Device power on
If an error occurs while the VHDIPL is in self-test, this mode will stay in the lower
right of the screen, you can choose to continue or shutdown. If you choose to continue,
the device will continue to start, until the device login screen is shown.