User manual

Privacy zone
Edit zone
PRIVACY ZONE
-----------------------------
ZONE NO.
DISPLAY
CLEAR ZONE
<EDIT ZONE>
BACK
EXIT
EDIT ZONE 1
-----------------------------
MOVE TO TARGET POSITION
[NEAR:SELECT/FAR:CANCEL]
EDIT ZONE 1
-----------------------------
[ :ADJUST ZONE WIDTH]
[ :ADJUST ZONE HEIGHT]
[NEAR:SAVE /FAR:CANCEL]
From the display setup menu, use the joystick
to highlight PRIVACY ZONE and key: NEAR
ZONE NO. (1-4) - shows the privacy zone
currently being modified.
DISPLAY (ON / OFF) - determines whether
the privacy zone is displayed during normal
operation.
<EDIT ZONE> - allows the operator to define
the privacy zone.
Highlight ZONE NO and key: NEAR. Move the
joystick up and down to select the privacy
zone number to change and key: NEAR
Highlight the item to modify and key: NEAR
Use the joystick to change the setting and key:
NEAR to save or: FAR to cancel.
CLEAR ZONE - option to delete the currently
selected privacy zone.
From the privacy zone menu, use the joystick
to highlight EDIT ZONE and key: NEAR
Use the joystick to move the speed dome to
the approximate position and zoom level for
the privacy zone and key: NEAR to select or
FAR to cancel and return to the privacy zone
menu.
1
OFF
CANCEL
Move the joystick left and right to finely adjust
the width of the privacy zone and up and down
to finely adjust the height.
To save the privacy zone, key: NEAR or key:
FAR to cancel.
MOTION SETUP
-----------------------------
PRESET LOCK
PWR UP ACTION
AUTO FLIP
JOG MAX SPEED
JOG DIRECTION
FRZ IN PRESET
(PARKING ACTION SETUP)
(ALARM INPUT SETUP)
BACK
EXIT
OFF
ON
ON
140/SEC
INVERSE
OFF
From the main menu, use the joystick to
highlight MOTION SETUP and key: NEAR
PRESET LOCK (ON / OFF) - when set to ON,
preset programming from the keyboard is
disabled.
PWR UP ACTION (ON/OFF) - when set to
ON, the last operation is resumed when power
is restored after a power failure.
AUTO FLIP (ON / OFF) - when set to ON, the
dome will flip when tilt reaches 90 degrees.
JOG MAX SPEED - the maximum speed in
degrees / second during manual operation.
JOG DIRECTION (INVERSE / NORMAL) -
when set to normal, the pan direction is
opposite to the joystick movement.
FRZ IN PRESET (ON / OFF) - when set to ON
the image is frozen during preset movements.
<PARKING ACTION SETUP> - Configure an
action that runs after a defined period of
inactivity.
<ALARM INPUT SETUP> - Configure the
action of the alarm inputs.
Highlight the item to modify and key: NEAR
Use the joystick to change the setting and key:
NEAR to save or: FAR to cancel.
Motion setup
PARKING ACTION SETUP
-----------------------------
PARK ENABLE
WAIT TIME
PARK ACTION
BACK
EXIT
OFF
00:10:00
HOME
From the motion setup menu, use the joystick
to highlight PARKING ACTION SETUP and
key: NEAR
PARK ENABLE (ON/OFF) - when set to ON,
the speed dome will run the specified park
action after the wait time has elapsed.
WAIT TIME - can be set between one second
and 4 hours. If no manual control occurs
during this time, the park action will run.
PARK ACTION - choose the action to run after
the wait time has elapsed. This can be return
to home position or any preset, VST function,
group or pattern tour.
Highlight the item to modify and key: NEAR
Use the joystick to change the setting and key:
NEAR to save or: FAR to cancel.
Note: if the speed dome is running a
pattern tour, VST function or group
function, the parking action will not run.
Parking action setup
7