User manual

From the function setup menu, use the joystick
to highlight VST SETUP and key: NEAR
VST NO. (1-8) - shows the VST number
currently being modified.
1ST POS. - any defined preset between 1 &
128.
2ND POS. - any defined preset between 1 &
128.
VST SPEED - determines the speed of
movement in degrees per second between
each preset position.
CLEAR VST - deletes the currently selected
VST function.
Highlight the item to modify and key: NEAR
Use the joystick to change the setting and key:
NEAR to save or: FAR to cancel.
Note: A VST function always moves anti-
clockwise to the 1st position and then
clockwise to the 2nd position.
VST setup
VST SETUP
-----------------------------
VST NO.
1ST POS.
2ND POS.
VST SPEED
CLEAR VST
BACK
EXIT
1
NOT USED
NOT USED
30/SEC
CANCEL
PATTERN SETUP
-----------------------------
PATTERN NO.
CLR PATTERN
<EDIT PATTERN>
BACK
EXIT
1
UNDEFINED
CANCEL
From the function setup menu, use the joystick
to highlight PATTERN SETUP and key: NEAR
PATTERN NO. (1 - 4) - The pattern number
currently being modified.
CLR PATTERN - the currently selected pattern
can be deleted.
<EDIT PATTERN> - allows the operator to
program a pattern tour
Highlight the item to modify and key: NEAR
Use the joystick to change the setting and key:
NEAR to save or: FAR to cancel.
Pattern setup
EDIT PATTERN 1
-----------------------------
MOVE TO START POSITION
[NEAR:START /FAR:CANCEL
EDIT PATTERN 1
From the pattern setup menu, use the joystick
to highlight EDIT PATTERN and key: NEAR
Position the speed dome to the desired
starting point and key: NEAR
Move the dome to the various positions and
zoom levels required for the pattern. The white
squares at the top of the display show
remaining storage and disappear as the
pattern is recorded.
To save the pattern, key: NEAR
To abandon pattern programming, key: FAR
Note: Pattern tour memory is only used
when movements are recorded. Pauses
between movements, regardless of time,
do not use pattern tour memory.
Edit pattern
From the function setup menu, use the joystick
to highlight GROUP SETUP and key: NEAR
GROUP NO. (1-8) - shows the group number
currently being modified.
CLEAR GROUP - the currently selected group
can be deleted.
<EDIT GROUP> - allows the operator to
program the group functions.
Highlight the item to modify and key: NEAR
Use the joystick to change the setting and key:
NEAR to save or: FAR to cancel.
Group setup
GROUP SETUP
-----------------------------
GROUP NO.
CLEAR GROUP
<EDIT GROUP>
BACK
EXIT
1
UNDEFINED
CANCEL
9
0/0/x1/N
0/0/x1/N