User manual

ALARM INPUT SETUP
-----------------------------
ALARM 1 TYPE
ALARM 2 TYPE
ALARM 1 ACT
ALARM 1 ACT
BACK
EXIT
From the motion setup menu, use the joystick
to highlight ALARM INPUT SETUP and key:
NEAR
ALARM 1,2 TYPE - each alarm input can be
configured as Normally Open or Normally
Closed.
ALARM 1,2 ACT - for each alarm action,
specify the preset number, VST function,
pattern tour or group to call. Leave set to NOT
USED to disable the alarm input.
Highlight the item to modify and key: NEAR
Use the joystick to change the setting and key:
NEAR to save or: FAR to cancel.
N.OPEN
N.OPEN
NOT USED
NOT USED
Alarm input setup
FUNCTION SETUP
-----------------------------
<PRESET SETUP>
<VST SETUP>
<PATTERN SETUP>
<GROUP SETUP>
<SCHEDULE SETUP>
BACK
EXIT
From the main menu, use the joystick to
highlight FUNCTION SETUP and key: NEAR
<PRESET SETUP> - full management and
programming of individual presets.
<VST SETUP> - full management and
programming of preset to preset VST
functions.
<PATTERN SETUP> - full management and
programming of pattern tours.
<GROUP SETUP> - full management and
programming of group functions.
<SCHEDULE SETUP> - full management and
programming of scheduled actions.
Highlight the setup menu required and key:
NEAR
Remember: A menu item surrounded by
brackets shows it has a sub menu.
Function setup
PRESET SETUP
-----------------------------
PRESET NO.
<EDIT SCENE>
<EDIT LABEL>
CLR PRESET
CAM ADJUST
ALARM OUT
BACK
EXIT
1
CANCEL
GENERAL
OFF
From the function setup menu, use the joystick
to highlight PRESET SETUP and key: NEAR
PRESET NUMBER (1 - 128) - The preset
number currently being modified. If the preset
number is already defined, the speed dome
will move to that preset position, otherwise
UNDEFINED is displayed under the preset
number.
<EDIT SCENE> - use this option to program
the preset position.
<EDIT LABEL> - use to edit the preset label.
CLR PRESET - use this option to delete the
current preset position.
CAM ADJUST - Can be changed to SPECIAL
which allows white balance and auto exposure
to configured for each preset position. See
page 11 & 12 for white balance and auto
exposure programming details.
ALARM OUT - set to ON to activate the relay
output when this preset position is called.
The last 4 options above are only available
when the selected preset position has been
programmed.
Highlight the item to modify and key: NEAR
Use the joystick to change the setting and key:
NEAR to save or: FAR to cancel.
Preset setup
EDIT SCENE - PRESET 1
-----------------------------
MOVE TO TARGET POSITION
[NEAR:SAVE /FAR:CANCEL]
From the preset setup menu, use the joystick
to highlight EDIT SCENE and key: NEAR
Using the joystick, move the speed dome to
the desired position and zoom level and key:
NEAR to save or: FAR to cancel.
Edit scene
Edit label
EDIT LABEL - PRESET 1
-----------------------------
[ ]
----------
1234567890 OK
ABCDEFGHIJ CANCEL
KLMNOPQRST
UVWXYZabcd
efghijklmn
opqrstuvwx
yz<>-/:.
Backspace
Space
From the preset setup menu, use the joystick
to highlight EDIT LABEL and key: NEAR
Move the joystick to choose the required
character and key: NEAR to insert it. Repeat
until the preset label is complete.
If a mistake is made, select and key: NEAR.
The cursor moves back one square.
Select OK to save the preset label or
CANCEL to lose changes, and key: NEAR to
exit.
8