Manualshelf

User manual

ManualsBrandsVidecon ManualsHome building and DecorConcept Pro VHSD-810EXT
11121314151617181920
1
LABEL
2
- Edits label to show on monitor when preset runs.
- Max. 10 alphabets are allowed(Including space).
LABEL – Alphabet Input
3
- If you complete the label editing, move cursor to ‘OK’ and press
near key to save completed label. To abort current change, move
cursor to ‘CANCEL’ and press near key.
PRESET SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET NO.
<
EDIT SCENE>
<LABEL>
CLR PRESET
CAM ADJUST
ALARM OUT
BACK
EXIT
1
CANCEL
GENERAL
-
PRESET SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET NO.
<
EDIT SCENE>
<LABEL>
CLR PRESET
CAM ADJUST
ALARM OUT
BACK
EXIT
1
CANCEL
<
SPECIAL>
-
CAM ADJUST -PRESET1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
BACK
EXIT
>
2
1
2
Moves to ‘WHITE BALANCE SETUP’ screen. Refer page 34.
Moves to ‘AUTO EXPOSURE SETUP’ screen. Refer page 35.
CAM ADJUST
2
Sets WB/AE for the preset when ‘CAM ADJUST’ value is ‘SPECIAL’.
<AUTO EXPOSURE SETUP>
<WHITE BALANCE SETUP>
LABEL PRESET1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
[ ]
OK
CANCEL
- - - - - - - - - -
1 2 3 4 5 6 7 8 9 0
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z a b c d
e f g h i j k l m n
o p q r s t u v w x
y z
< >
-
/
: .
>
3
LABEL PRESET1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
[ ]
OK
CANCEL
SKY
- - - - - - - - - -
1 2 3 4 5 6 7 8 9 0
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z a b c d
e f g h i j k l m n
o p q r s t u v w x
y z
< >
-
/
: .
LABEL PRESET1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
[ ]
OK
CANCEL
- - - - - - - - - -
1 2 3 4 5 6 7 8 9 0
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z a b c d
e f g h i j k l m n
o p q r s t u v w x
y z
< >
-
/
: .
a
b
c
d
e
d
a
Preset NO. for Label
b
Input Cursor: The character which cursor is located will be input or
edited.
c
Cursor Selecting Alphabet: Using Left/Right/Up/Down of joystick,
move to an appropriate character from the character set.
Space: If you want to use blank, choose space character (" ").
e
Back-Space:
If you want to delete a character before, use back space
character (’ ‘).
FUNCTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<PRESET SETUP>
<VST SETUP>
<PATTERN SETUP>
<GROUP SETUP>
<SCHEDULE SETUP>
BACK
EXIT
FUNCTION SETUP
1
Configure 5 special functions with this menu.
<PRESET SETUP>
Moves to ‘PRESET SETUP’ screen.
<VST SETUP>
Moves to ‘VST SETUP’ screen. Refer page 28.
<PATTERN SETUP>
Moves to ‘PATTERN SETUP’ screen. Refer page 29.
<GROUP SETUP>
Moves to ‘GROUP SETUP’ screen. Refer page 30.
<SCHEDULE SETUP>
Moves to ‘SCHEDULE SETUP’ screen. Refer page 32.
PRESET SETUP - Undefined Screen
2
127 presets from the number 1 to 128 can be assigned excluding
preset 95 reserved for menu.
PRESET SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET NO.
<
EDIT SCENE>
BACK
EXIT
1
UNDEFINED
PRESET SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET NO.
<
EDIT SCENE>
<LABEL>
CLR PRESET
CAM ADJUST
ALARM OUT
BACK
EXIT
1
CANCEL
GENERAL
-
> > >
4
PRESET NO.
If a selected preset is already defined, camera moves to pre-defined
position and preset characteristics such as label and relay outputs show
on monitor. (Refer screen 4) If a selected preset is not defined,
“UNDEFINED” shows on monitor.
1 ~ 128 (Excluding 95)
1 ~ 128 (Excluding 95)
CANCEL / OK
<EDIT SCENE>
Moves to ‘EDIT SCENE’ setup screen.
Edits Label to show on monitor when preset runs. If the preset is not
defined, this is not shown. Refer following page to setup label.
Deletes current preset data. If the preset is not defined, this is not shown.
Relay output can be linked with preset run. ‘ - ‘means off, ‘1’ means on.
-
CAM ADJUST_GENERAL: The general mode means that WB or AE defined
‘CONCEPT PRO SPEED DOME>CAMERA SETUP’ will be applied to this preset.
- CAM ADJUST_SPECIAL: The Special mode means that WB or AE can be
set up independently or separately for each preset in each preset setup
menu.
- Special WB/AE value should activate only when the camera arrives at
each preset location. During jog operation, general WB/AE value should
be applied.
- Refer following page to set special WB/AE.
PRESET SETUP
4
If the preset is defined, the information will be shown on the OSD
menu with the setting, and the alarm device (if defined) will be
activated.
PRESET NO.
CLR PRESET
GENERAL / SPECIAL
CAM ADJUST
- / 1
ALARM OUT
<EDIT SCENE>
<LABEL>
EDIT SCENE -PRESET1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO TARGET POSITION
[NEAR:SELECT/FAR:CANCEL]
0/0/x1/E
EDIT SCENE
3
1. Using joystick, move camera to desired position.
2. Using zoom key, move camera to desired screen size.
3. By pressing near key, the save current PTZ data
1
2
3
Press
Near/Enter
Key
Press
Near/Enter
Key
Press
Near/Enter
Key
Press
Near/Enter
Key
Press
Near/Enter
Key
Select <EDIT SCENE>,
Press Near/Enter Key
OSD - FUNCTION SETUP > PRESET SETUP
27
OSD - FUNCTION SETUP > PRESET SETUP
3
26