Product Manual

3
EN NL FR DE ES SV IT Appendix
1. General Information
The BlueSolar Charge Controller series uses Pulse Width Modulation (PWM) charge
voltage control combined with a multistage charge control algorithm.
2. Features
• Three stage battery charging [bulk – absorption – float]
• Battery type: Lead-ACID and LiFePO4 (with internal BMS)
• Protected against over current.
• Protected against short circuit.
• Protected against reverse polarity connection of the solar panels and/or battery.
• Low voltage load disconnect.
• Temperature protection.
3. Installation
Important note: Always connect the batteries first.
IMPORTANT
Always connect the batteries first.
• Use for 12V battery system only 12V (36 cells) solar panel array.
• Use for 24V battery system only 24V (72 cells) solar panel array.
• Use for 48V battery system only 2x24V (72 cells) solar panel
array in series.