Product Manual

8
10s and measure again to
make sure night falls. The
factory setting is 10sec
Press on the MENU
key again and you go
to:
Short-circuit protection
setting.
Some inductive or capacitive
consumer will trigger the short-
circuit protection during start
up. Therefore the SC-
protection can be disabled
manually. Sc.F=OFF,
Sc.n=ON. The default is ON.
The factory setting is Sc.n.
Load current display. It shows load current and battery
capacity.
Press MENU to enter next display.
USB Voltage display. It shows the USB voltage
5V (2A max)
Press MENU to enter next display.
Controller temperature display. If the controller
overheats it will automatic shut down and wait for the
temperature to drop to normal level and then it will start
again.
Press Press MENU to enter Main display.