Product Manual

6. Technical specifications
Phoenix Smart Charger
12V,
2 outputs
12/30(1+1)
12/50(1+1)
12V,
3 outputs
12/30(3)
12/50(3)
24V,
2 outputs
24/16(1+1)
24/25(1+1)
24V,
3 outputs
24/16(3)
24/25(3)
Input voltage 230 VAC (range: 210 – 250 V)
DC input voltage range 290 – 355 VDC
Frequency 45-65 Hz
Power factor 0,7
Back current drain AC disconnected: < 0,1 mA AC connected and charger remote off: < 6 mA
No load power consumption 1 W
Efficiency
12/30: 94%
12/50: 92%
12/30: 94%
12/50: 92%
94% 94%
Charge voltage 'absorption'
Normal: 14,4V High: 14,7V
Li-ion: 14,2V
Normal: 28,8V High: 29,4V
Li-ion: 28,4V
Charge voltage 'float'
Normal: 13,8V High: 13,8V
Li-ion: 13,5V
Normal: 27,6V High: 27,6V
Li-ion: 27,0V
Storage mode
Normal: 13,2V High: 13,2V
Li-ion: 13,5V
Normal: 26,4V High: 26,4V
Li-ion: 27,0V
Fully programmable Yes, with Bluetooth and/or VE.Direct
Charge current house battery 30 / 50 A 30 / 50 A 16 / 25 A 16 / 25 A
Low current mode 15 / 25 A 15 / 25 A 8 / 12.5 A 8 / 12.5 A
Charge current starter battery 3 A (1+1 output models only)
Charge algorithm 7 stage adaptive (3 stage adaptive for Li-ion)
Battery capacity
150-300 Ah (30A version)
250-500 Ah (50A version)
80-160 Ah (16A version)
125-250 Ah (25A version)
Number of battery connections 2 3 2 3
Protection Battery reverse polarity (fuse, not user accessible) / Output short circuit / Over temperature
Can be used as power supply Yes, output voltage can be set with Bluetooth and/or VE.Direct
Operating temp. range
-20 to 60°C (0 - 140°F)
Rated output current up to 40°C, derate linearly to 20% at 60°C
Humidity (non-condensing)
max 95%
Relay (programmable)
DC rating: 5A up to 28VDC
ENCLOSURE
Material & Colour aluminium (blue RAL 5012)
Battery-connection Screw terminals 16 mm² (AWG6)
AC-connection IEC 320 C14 inlet with retainer clip (AC cord with country specific plug must be ordered separately)
Protection category IP43 (electronic components), IP22 (connection area)
Weight kg (lbs) 3,5 kg
Dimensions (hxwxd) 180 x 249 x 100 mm (7.1 x 9.8 x 4.0 inch)
STANDARDS
Safety
EN 60335-1, EN 60335-2-29
Emission
EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity
EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Vibration
IEC68-2-6:10-150Hz/1.0G