Product Manual

27
EN NL FR DE ES SE
Auto shore curr. Setting If this setting is enabled, when the shore
current is connected, the shore current limit
will be displayed automatically.
†Shore cur. range
Setting The maximum current that the system is
capable of drawing.
Cache values? Setting Enable or disable value caching.
Save settings A Setting Save a copy of the current settings in the VVC.
Load settings A Setting Load the settings saved with “Save settings A”
into the current device (this must have the
same software version as the device from
which these values were copied).
Save settings B Setting Save a copy of the current settings in the VVC.
These settings are independent of those
saved with “Save settings A”.
Load settings B Setting Load the settings saved with “Save settings B”
into the current device (this must have the
same software version as the device from
which these values were copied).
Device address Information The device address for the VVC.
Alarms menu
Low battery Setting Disable this option to prevent the VVC from
generating an alarm when the battery is low.
High temperature Setting Disable this option to prevent the VVC from
generating an alarm when the temperature is
high.
Overload Setting Disable this option to prevent the VVC from
generating an alarm in the event of an
overload.
Connection lost Setting Disable this option to prevent the VVC from
generating an alarm when the connection to
the target device is lost.