Product Manual

24
Note: Only the options supported by the currently connected system will
be shown in the menu. In systems with multiple A.C. inputs/outputs,
some properties will appear multiple times.
Items marked with
† require a panel restart before the changes will be
properly registered.
Settings under the “VVC” menu are stored in the VVC, and not the target
device. This means that the value will be remembered if you connect a
different target (and conversely, if the VVC is replaced, these settings will
need to be re-configured).
Warning: An incorrectly configured device can cause damage to the
system. Before changing any options make sure you know the associated
risks. The descriptions below are summaries only; if in doubt consult the
manual for the target device, or your Victron dealer.
Table 6-1 - VVC menu summary
Name
Information
/ Setting
Details
Root menu
Device switch Setting Use this to turn the system on or off.
Shore cur. limit Setting The maximum current to draw from the shore
supply.
Device state Information Indicates the current status of the system.
DC voltage Information The battery voltage.
DC current The D.C. current flow between the battery and
the target system.
Mains AC voltage Information The voltage of the mains power supply,
Mains AC current Information The current being drawn from the mains
supply.
Mains AC power Information The power being consumed from the mains
supply.
Mains frequency Information The frequency of the mains supply.
Inv. AC voltage Information The voltage being produced by the inverter.
Inv. AC current Information The current drawn from the inverter.
Inv. AC power Information The power consumed from the inverter.
Inv. frequency Information The frequency of the inverter output.
VVC version Information The firmware version of the VVC.