Product Card

Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: [phone] | E-mail: [e-mail]
www.victronenergy.com
Blue Smart IP22 Charger
12 V, 1 output
15 / 20 / 30 A
12 V, 3 outputs
15 / 20 / 30 A
24 V, 1 output
8 / 12 / 16 A
24 V, 3 outputs
16 A
Input voltage range 180 – 265 VAC 180 – 265 VAC
Charge current, normal mode
15 / 20 / 30 A
8/12/16 A
Charge current, NIGHT or LOW
7,5 / 10 / 15 A
4 / 6 / 8 A
Efficiency
93 %
94 %
No load power consumption 0.5 W 0.5 W
Frequency 45 – 65 Hz 45 – 65 Hz
Number of outputs
1
3
1
3
Charge voltage 'absorption'
Normal: 14,4 V High: 14,7 V Li-ion: 14,2 V
Normal: 28,8 V High: 29,4 V Li-ion: 28,4 V
Charge voltage 'float' Normal: 13,8 V High: 13,8 V Li-ion: 13,5 V Normal: 27,6 V High: 27,6 V Li-ion: 27,0 V
Charge voltage 'storage' Normal: 13,2 V High: 13,2 V Li-ion: 13,5 V Normal: 26,4 V High: 26,4 V Li-ion: 27,0 V
Charge algorithm 6-stage adaptive
Can be used as power supply Yes
Protection
Battery reverse polarity (fuse) Output short circuit Over temperature
Operating temp. range
-40 to +60 °C (full rated output up to 40 °C)
Humidity (non-condensing)
Max 98 %
ENCLOSURE
Material & Colour Aluminium (blue RAL 5012)
Battery connection
Screw terminals 16 mm² / AWG6
230 VAC connection
Cable of 1,5 meter with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ)
Protection category
IP22
Weight
1,3 kg
Dimensions (h x w x d)
235 x 108 x 65 mm
STANDARDS
Safety EN 60335-1, EN 60335-2-29
Emission
EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity
EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Automotive ECE R10-5
Smart Battery Sense
Enables temperature and voltage
compensated charging.
BMV-712 Smart Battery Monitor
SmartShunt
Notes
1. The VE.Smart Network feature is enabled on all IP22 chargers with serial number HQ2024xxxxx and later.
2. Models with different current ratings can be paralleled and synchronized.
BMV-712 Smart Battery Monitor or SmartShunt enables temperature and voltage
compensated charging.
The battery charge current information can for example be used to switch from
absorption charging to float charging at a set battery tail current.