Manual

4.3. Commencing a new charge cycle
A new charge cycle will commence when:
a. Bulk stage is complete and the current output increases to the maximum charge current for four seconds (due to a
simultaneously connected load)
b. If re-bulk current is configured; the current output exceeds the re-bulk current in float or storage stage for four seconds (due to
a simultaneously connected load)
c. The MODE button is pressed or a new charge mode is selected
d. VictronConnect is used to select a new charge mode or change the function from ‘Power Supply’ to ‘Charger’ mode
e. The AC supply has been disconnected and reconnected
Blue Smart IP22 Charger
Page 7 Operation