Manual

7.3. Power supply function
The Victron blue smart charger range are also suitable for use as a DC power supply, to power equipment without a battery
connected (or while also connected to a battery).
While it’s still possible to use the charger as a power supply without changing any settings, a dedicated ‘Power supply’ mode
exists for this purpose/usage.
If the charger will be used as a power supply, it is recommended to activate ‘Power supply’ mode, as it will disable the internal
charge logic and provide a constant DC supply voltage.
To activate power supply mode, open the settings menu and in the ‘Function’ drop down menu select ‘Power supply’ mode; once
activated the BULK, ABS, FLOAT and STORAGE LEDs will be illuminated.
It is also possible to enable low current mode or night mode while in power supply mode and to specify the desired output
voltage.
To return the charger back to normal use as a battery charger, access the settings menu and in the ‘Function’ drop down menu
select ‘Charger’ mode again.
Blue Smart IP22 Charger
Page 26 Advanced Configuration