Manual

5.2. Using VictronConnect
With the blue smart charger range, selection of an integrated charge mode and other general settings can also be made with a
Bluetooth enabled device (such as a mobile phone or tablet); using the VictronConnect app.
For further details about the VictonConnect app refer to the online user manual:
https://www.victronenergy.com/live/victronconnect:start
To setup the charger using VictronConnect:
a. Download and install the VictronConnect app.
The VictronConnect app can be downloaded from the following locations:
i. Android – Google Play Store
ii. iOS/Mac – Apple App Store
b. Enable Bluetooth on the mobile phone or tablet (if not already enabled).
c. Open the VictronConnect app and look for the blue smart charger in the LOCAL page, if it doesn’t automatically appear
perform a scan for devices in range by selecting the ‘scan’ button (round orange button with circular arrow) in the bottom right
corner.
d. Select the blue smart charger from the local device list.
Blue Smart IP22 Charger
Page 10 Setup