User manual

-3-
1 Introduction
1.1 The VE.Net Generator Module (VGM)
The VE.Net Generator Module is designed to work in conjunction with the standard control system
of your generator to allow networked control and monitoring of the generator. The VGM provides
detailed monitoring and control facilities, including an auto-start function which allows you to send
a single instruction to start the generator. The VGM will automatically carry out the correct
process of pre-heat and cranking in order to start the generator.
1.2 Introduction to VE.Net
VE.Net stands for Victron Energy Network. It allows all VE.Net compatible devices to
communicate with each other. This means that the charger for example can get information from
the battery monitor to optimize the charge current. It is possible to control and monitor all your
VE.Net devices from a single VE.Net compatible control panel. This saves space and allows you
to control all your devices from one place. A VE.Net consists of a VE.Net panel (VPN), and one
or more other VE.Net devices, such as the VE.Net Tank Sensor or VE.Net Battery Controller.