User manual

-13-
Step 5) Once the generator is stable go to the “Calib mag pickup”
menu and press “Enter”.
Step 6) The text on the second line will momentarily read “Calib.
Complete”.
The calibration procedure is now complete. The number of flywheel
teeth detected can be seen in the “Flywheel teeth” property.
If there was a problem reading the magnetic pickup during calibration,
the “Calib mag pickup” property will momentarily read “Calib. Error!”.
Check the magnetic pickup connections and try again.
Calib mag pickup
→ yes
Calib mag pickup
Calib. complete
Flywheel teeth
→ 150
Calib mag pickup
Calib. error!