Technical information

35
QUATTRO INVERTER/CHAGER 3KVA  5KVA 120V
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: [phone] | Fax: [phone]
E-mail: [e-mail] | www.victronenergy.com
Quattro 12/5000/200-100/100 120V 24/5000/120-100/100 120V 48/3000/35-50/50 120V 48/5000/70-100/100 120V
PowerControl / PowerAssist Yes
Integrated Transfer switch Yes
AC inputs (2x) Input voltage range: 90-140 VAC Input frequency: 45 – 65 Hz Power factor: 1
Maximum feed through current (A) 2x100 2x100 2x50 2x100
INVERTER
Input voltage range (V DC) 9,5 - 17 19 – 33 37,2 – 64,4 37,2 – 64,4
Output (1) Output voltage: 120 VAC ± 2% Frequency: 60 Hz ± 0,1%
Cont. output power at 25 °C (VA) (3) 5000 5000 3000 5000
Cont. output power at 25 °C (W) 4500 4500 2500 4500
Cont. output power at 40 °C (W) 4000 4000 2200 4000
Peak power (W) 10000 10000 6000 10000
Maximum efficiency (%) 94 94 94 95
Zero-load power (W) 25 25 15 25
Zero load power in AES mode (W) 20 20 10 20
Zero load power in Search mode (W) 5 5 5 6
CHARGER
Charge voltage 'absorption' (V DC) 14,4 28,8 57,6 57,6
Charge voltage 'float' (V DC) 13,8 27,6 55,2 55,2
Storage mode (V DC) 13,2 26,4 52,8 52,8
Charge current house battery (A) (4) 200 120 35 70
Charge current starter battery (A) 4 4 n. a. n. a.
Battery temperature sensor Yes
GENERAL
Auxiliary output (A) (5) 50 50 32 50
Programmable relay (6) 3x 3x 3x 3x
Protection (2) a-g
VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration
General purpose com. port (7) Yes, 2x
Remote on-off Yes
Common Characteristics Operating temp.: -20 to +50 ˚C ( 0 - 120°F) Humidity (non condensing): max. 95%
ENCLOSURE
Common Characteristics Material & Colour: aluminium (blue RAL 5012) Protection category: IP 21
Battery-connection Four M8 bolts (2 plus and 2 minus connections)
230 V AC-connection M6 bolts M6 bolts
Screw terminals 13 mm (6
AWG)
M6 bolts
Weight (kg) 75 lb 34 kg 66 lb 30 kg 42 lb 19 kg 66 lb 30 kg
Dimensions (hxwxd)
18,5 x 14,0 x 11,2 inch
470 x 350 x 280 mm
17,5 x 13,0 x 9,6 inch
444 x 328 x 240 mm
14.3x10.2x8.6 inch
362x258x218 mm
17,5 x 13,0 x 9,6 inch
444 x 328 x 240 mm
STANDARDS
Safety EN 60335-1, EN 60335-2-29
Emission, Immunity EN55014-1, EN 55014-2, EN 61000-3-3
1) Can be adjusted to 50 Hz
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 120 VAC on inverter output
g) input voltage ripple too high
3) Non linear load, crest factor 3:1
4) At 25 ˚C ambient5) Switches off when no external AC source available
5) Switches off when no external AC source available
6) Programmable relay that can be set for general alarm, DC undervoltage or genset start/stop function
AC rating: 120V/4A
DC rating: 4A up to 35VDC, 1A up to 60VDC
7) A. o. to communicate with a Lithium Ion battery BMS
Digital Multi Control
A convenient and low cost solution for
remote monitoring, with a rotary knob to
set Power Control and Power Assist levels.
Blue Power Panel
Connects to a Multi or Quattro and all
VE.Net devices, in particular the VE.Net
Battery Controller.
Graphic display of currents and voltages.
Computer controlled operation and monitoring
Several interfaces are available:
- MK2.2 VE.Bus to RS232 converter
Connects to the RS232 port of a computer (see ‘A guide to VEConfigure’)
- MK2-USB VE.Bus to USB converter
Connects to a USB port (see ‘A guide to VEConfigure’)
- VE.Net to VE.Bus converter
Interface to VE.Net (see VE.Net documentation)
- VE.Bus to NMEA 2000 converter
- Victron Global Remote
The Global Remote is a modem which sends alarms, warnings and system
status reports to cellular phones via text messages (SMS). It can also log
data from Victron Battery Monitors, Multi’s, Quattro’s and Inverters to a
website through a GPRS connection. Access to this website is free of
charge.
- Victron Ethernet Remote
To connect to Ethernet.
BMV Battery Monitor
The BMV Battery Monitor features an
advanced microprocessor control
system combined with high resolution
measuring systems for battery voltage
and charge/discharge current. Besides
this, the software includes complex
calculation algorithms, like Peukert’s
formula, to exactly determine the state
of charge of the battery. The BMV
selectively displays battery voltage,
current, consumed Ah or time to go. The
monitor also stores a host of data
regarding performance and use of the
battery.