Technical information

31
QUATTRO INVERTER/CHARGER 3KVA  10KVA 230V
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: [phone] | Fax: [phone]
E-mail: [e-mail] | www.victronenergy.com
Quattro
12/3000/120-50/30
24/3000/70-50/30
12/5000/220-100/100
24/5000/120-100/100
48/5000/70-100/100
24/8000/200-100/100
48/8000/110-100/100 48/10000/140-100/100
PowerControl / PowerAssist Yes
Integrated Transfer switch Yes
AC inputs (2x) Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Power factor: 1
Maximum feed through current (A) 50 / 30 2x100 2x100 2x100
INVERTER
Input voltage range (V DC) 9,5 – 17V 19 – 33V 38 – 66V
Output (1) Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1%
Cont. output power at 25 °C (VA) (3) 3000 5000 8000 10000
Cont. output power at 25 °C (W) 2500 4500 7000 9000
Cont. output power at 40 °C (W) 2200 4000 6300 8000
Peak power (W) 6000 10000 16000 20000
Maximum efficiency (%) 93 / 94 94 / 94 / 95 94 / 96 96
Zero-load power (W) 15 / 15 25 / 25 / 25 30 / 35 35
Zero load power in AES mode (W) 10 / 10 20 / 20 / 20 25 / 30 30
Zero load power in Search mode (W) 4 / 5 5 / 5 / 6 8 / 10 10
CHARGER
Charge voltage 'absorption' (V DC) 14,4 / 28,8 14,4 / 28,8 / 57,6 28,8 / 57,6 57,6
Charge voltage 'float' (V DC) 13,8 / 27,6 13,8 / 27,6 / 55,2 27,6 / 55,2 55,2
Storage mode (V DC) 13,2 / 26,4 13,2 / 26,4 / 52,8 26,4 / 52,8 52,8
Charge current house battery (A) (4) 120 / 70 220 / 120 / 70 200 / 110 140
Charge current starter battery (A) 4 (12V and 24V models only)
Battery temperature sensor Yes
GENERAL
Auxiliary output (A) (5) 25 50 50 50
Programmable relay (6) 1x 3x 3x 3x
Protection (2) a-g
VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration
General purpose com. port (7) 1x 2x 2x 2x
Remote on-off Yes
Common Characteristics Operating temp.: -40 to +50 ˚C Humidity (non condensing): max. 95%
ENCLOSURE
Common Characteristics Material & Colour: aluminium (blue RAL 5012) Protection category: IP 21
Battery-connection Four M8 bolts (2 plus and 2 minus connections)
230 V AC-connection
Screw terminals 13 mm
2
(6 AWG)
Bolts M6 Bolts M6 Bolts M6
Weight (kg) 19 34 / 30 / 30 45/41 45
Dimensions (hxwxd in mm) 362 x 258 x 218
470 x 350 x 280
444 x 328 x 240
444 x 328 x 240
470 x 350 x 280 470 x 350 x 280
STANDARDS
Safety EN 60335-1, EN 60335-2-29
Emission, Immunity EN55014-1, EN 55014-2, EN 61000-3-3, EN 61000-6-3, EN 61000-6-2, EN 61000-6-1
1) Can be adjusted to 60 HZ; 120 V 60 Hz on
request
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 230 VAC on inverter output
g) input voltage ripple too high
3) Non linear load, crest factor 3:1
4) At 25 ˚C ambient
5) Switches off when no external AC source available
6) Programmable relay that can a. o. be set for general alarm,
DC undervoltage or genset start/stop function
AC rating: 230V/4A
DC rating: 4A up to 35VDC, 1A up to 60VDC
7) A. o. to communicate with a Lithium Ion battery BMS
Digital Multi Control Panel
A convenient and low cost solution for remote
monitoring, with a rotary knob to set Power
Control and Power Assist levels.
Blue Power Panel
Connects to a Multi or Quattro and all VE.Net
devices, in particular the VE.Net Battery
Controller.
Graphic display of currents and voltages.
Computer controlled operation and monitoring
Several interfaces are available:
- MK2.2 VE.Bus to RS232 converter
Connects to the RS232 port of a computer (see ‘A guide to VEConfigure’)
- MK2-USB VE.Bus to USB converter
Connects to a USB port (see ‘A guide to VEConfigure’)
- VE.Net to VE.Bus converter
Interface to VE.Net (see VE.Net documentation)
- VE.Bus to NMEA 2000 converter
- Victron Global Remote
The Global Remote is a modem which sends alarms, warnings and system status
reports to cellular phones via text messages (SMS). It can also log data from
Victron Battery Monitors, Multi’s, Quattro’s and Inverters to a website through
a GPRS connection. Access to this website is free of charge.
- Victron Ethernet Remote
To connect to Ethernet.
BMV Battery Monitor
The BMV Battery Monitor features an
advanced microprocessor control system
combined with high resolution measuring
systems for battery voltage and
charge/discharge current. Besides this, the
software includes complex calculation
algorithms, like Peukert’s formula, to
exactly determine the state of charge of
the battery. The BMV selectively displays
battery voltage, current, consumed Ah or
time to go. The monitor also stores a host
of data regarding performance and use of
the battery.
Several models available (see battery
monitor documentation).