Technical information

27
PHOENIX INVERTERS 1200VA  5000VA 230V
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: [phone] | Fax: [phone]
E-mail: [e-mail] | www.victronenergy.com
Phoenix Inverter
C12/1200
C24/1200
C12/1600
C24/1600
C12/2000
C24/2000
12/3000
24/3000
48/3000
24/5000
48/5000
Parallel and 3-phase operation Yes
INVERTER
Input voltage range (V DC) 9,5 – 17V 19 – 33V 38 – 66V
Output Output voltage: 230 VAC ±2% Frequency: 50 Hz ± 0,1% (1)
Cont. output power at 25 ºC (VA) (2) 1200 1600 2000 3000 5000
Cont. output power at 25 ºC (W) 1000 1300 1600 2500 4500
Cont. output power at 40 ºC (W) 900 1200 1450 2200 4000
Peak power (W) 2400 3000 4000 6000 10000
Max. efficiency 12/ 24 /48 V (%) 92 / 94 92 / 94 92 / 92 93 / 94 / 95 94 / 95
Zero-load power 12 / 24 / 48 V (W) 8 / 10 8 / 10 9 / 11 15 / 15 / 16 25 / 25
Zero-load power in AES mode (W) 5 / 8 5 / 8 7 / 9 10 / 10 / 12 20 / 20
Zero-load power in Search mode (W) 2 / 3 2 / 3 3 / 4 4 / 5 / 5 5 / 6
GENERAL
Programmable relay (3) Yes
Protection (4) a - g
VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration
Remote on-off Yes
Common Characteristics
Operating temperature range: -40 to +50 ºC (fan assisted cooling)
Humidity (non condensing): max 95%
ENCLOSURE
Common Characteristics Material & Colour: aluminum (blue RAL 5012) Protection category: IP 21
Battery-connection battery cables of 1.5 meter included M8 bolts 2+2 M8 bolts
230 V AC-connection G-ST18i plug Spring-clamp Screw terminals
Weight (kg) 10 12 18 30
Dimensions (hxwhd in mm) 375x214x110 520x255x125 362x258x218 444x328x240
STANDARDS
Safety EN 60335-1
Emission Immunity EN 55014-1 / EN 55014-2
1) Can be adjusted to 60Hz and to 240V
2) Non linear load, crest factor 3:1
3) Programmable relay that can a.o. be set for
general alarm, DC undervoltage or genset
start/stop function.
AC rating: 230V/4A
DC rating: 4a up to 35VDC, 1A up to 60VDC
4) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 230 V AC on inverter output
g) input voltage ripple too high
Phoenix Inverter Control
This panel can also be used on a
MultiPlus inverter/charger when an
automatic transfer switch but no charger
function is desired.
The brightness of the LEDs is
automatically reduced during night time.
Computer controlled operation and monitoring
Several interfaces are available:
- MK2.2 VE.Bus to RS232 converter
Connects to the RS232 port of a computer (see ‘A guide to VEConfigure’)
- MK2-USB VE.Bus to USB converter
Connects to a USB port (see ‘A guide to VEConfigure’)
- VE.Net to VE.Bus converter
Interface to VE.Net (see VE.Net documentation)
- VE.Bus to NMEA 2000 converter
- Victron Global Remote
The Global Remote is a modem which sends alarms, warnings and system
status reports to cellular phones via text messages (SMS). It can also log
data from Victron Battery Monitors, Multi’s, Quattro’s and Inverters to a
website through a GPRS connection. Access to this website is free of charge.
- Victron Ethernet Remote
To connect to Ethernet.
BMV Battery Monitor
The BMV Battery Monitor features an
advanced microprocessor control system
combined with high resolution
measuring systems for battery voltage
and charge / discharge current. Besides
this, the software includes complex
calculation algorithms, like Peukert’s
formula, to exactly determine the state of
charge of the battery. The BMV selectively
displays battery voltage, current,
consumed Ah or time to go. The monitor
also stores a host of data regarding
performance and use of the battery.
Several models available (see battery
monitor documentation).