Datasheet

67
www.victronenergy.com
Programmable
The BlueSolar PWM-Pro series is ready for use with its default settings.
It also is fully programmable with help of the dedicated BlueSolar Pro Remote Panel (see features below).
Features
- Lighting control function, fully programmable with the Remote Panel.
- Three stage battery charging (bulk, absorption, float), fully programmable with the Remote Panel.
- Integrated battery monitor function (Remote Panel needed to display state of charge).
- Load output with low voltage disconnect and manual control (default setting).
- Optional external temperature sensor.
- Load output protected against over load and short circuit.
- Protected against reverse polarity connection of the solar panels and/or battery.
Day/night timing options
See Remote Panel manual for details
BlueSolar PWM-Pro charge controllers
BlueSolar PWM-Pro 10 A
BlueSolar Pro Remote Panel
Blue Solar PWM-Pro 12/24-5 12/24-10 12/24-20 12/24-30
Battery Voltage
12/24V with automatic system voltage detection
Rated charge current
5 A 10 A 20 A 30 A
Automatic load disconnect
Yes
Maximum solar voltage
28 V / 55 V (1)
Self-consumption
< 10 mA
Load output Manual control + low voltage disconnect
Protection Battery reverse polarity (fuse) Output short circuit Over temperature
Battery temperature sensor Optional (article SCC940100100)
Temperature compensation
-30 mV / °C resp. -60 mV / °C
(if temperature sensor installed)
Remote panel
Optional (article SCC900300000)
Grounding
Common positive
Operating temp. range -20 to +50°C
Humidity (non condensing) Max 98 %
DEFAULT SETTINGS
Absorption charge (2) 14.4 V / 28,8 V
Float charge (2) 13.8 V / 27,6 V
Equalization charge (2)
14,6 V / 29,2 V
Low voltage load disconnect
11,1 V / 22,2 V
Low voltage load reconnect
12,6 V / 25,2 V
ENCLOSURE
Terminal size
4 mm²
4 mm²
10 mm² 10 mm²
Protection category IP30
Weight 0,13 kg
0,13 kg 0,3 kg 0,5 kg
Dimensions (h x w x d)
138x70x37 mm
5.4x2.7x1.4 inch
138x70x37 mm
5.4x2.7x1.4 inch
160x82x48 mm
6.3x3.2x1.9 inch
200x100x57 mm
7.9x4.0x2.3 inch
STANDARDS
Safety IEC 62109-1
Emission EN 61000-6-1, EN 61000-6-3, ISO 7637-2
1) For 12V use 36 cell Solar panels
For 24V use 72 cell Solar panels
BlueSolar PWM-Pro charge controllers