Datasheet

47
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: [phone] | Fax: [phone]
E-mail: [e-mail] | www.victronenergy.com
Global Remote Antenna
The Global Remote Antenna is an optional
accessory to improve the reception of the
Victron Global Remote. The Global Remote
Antenna replaces the standard antenna
that is included with the Global Remote.
The antenna is an outdoor 4dBi Gain
antenna for stationary usage. A standard
5m low loss coax cable and wall-mount is
included.
Specifications:
Frequency: 900 (2dBi) / 1800 &
1900-1990 and
1990-2200 and
2400Mhz
Vertically polarized
Antenna length: 24cm
Antenna diameter: 1,8cm
Impedance: 50 Ω
Connector: SMA-M connector
Victron Global Remote 2 Victron Ethernet Remote
Serial connection (Mk2.2a – included) Connect VE.Bus Multi/Quattro/Inverter unit/system
Serial connection (BMV-602 Datalink – not included) Connect BMV-602 Battery Monitor
GENERAL
Power supply voltage range 5.5 to 32VDC
Current draw (max.) 0.48A at 5.5VDC
Current draw (connected to GSM network) 90mA at 12VDC and 50mA at 24 VDC
Operating temperature range -30° to 75° C. / -22° to 167° F.
ENCLOSURE
Dimensions VGR Modem (h x w x d) 73 x 54.5 x 25.5 mm / 2.9 x 2.1 x 1 inch
Weight VGR Modem 89 grams / 3.1 ounces
Body Aluminium
Installation Two aluminum mounting bridles
GSM / GPRS
GPRS data usage Depends on usage
Antenna connection 50 Ohm SMA
INCLUDED ACCESSORIES
GSM antenna Included Included
Ethernet attachment n.a. Included
Battery cable With inline fuse Included
Y-cable for serial and IO Extender connection Included Included
Male DB15 to female DB9 cable Included Included
MK2 interface Included Included
OPTIONAL ACCESSORIES (NOT INCLUDED, TO BE ORDERED SEPARATELY)
Global Remote to BMV-60xS conn. kit Compatible Compatible
VGR IO Extender Compatible Not compatible
Global Remote Antenna Compatible Compatible
BMV-600S and 602S
The BMV-600S and 602S are
our newest high precision
battery monitors. The
essential function of a battery
monitor is to calculate
ampere-hours consumed as
well as the state of charge of a
battery. Ampere-hours
consumed are calculated by
integrating the current
flowing in or out of the
battery.
Victron
Global Remote
to BMV-60xS conn. kit
Cable kit required to connect
the BMV-60xS and the Victron
Global Remote. BMV 60xS
Data Link included.
MultiPlus
Inverter/Charger
The MultiPlus is a powerful
true sine wave inverter, a
sophisticated battery charger
that features adaptive charge
technology, and a high-speed
AC transfer switch in a single
compact enclosure.
Phoenix Inverter
Pure sinwave output, high
peak power and high
efficiency. Combined high
frequency and line frequency
technologies ensure the best
of both worlds.
Quattro
Inverter/Charger
The Quattro can be connected
to two independent AC
sources, for example shore-
side power and a generator,
or two generators. The
Quattro will automatically
connect to the active source.
Example of graph available on https://vrm.victronenergy.com
Note that it is not possible to combine the Global Remote or Ethernet Remote with one of the
following products in a VE.Bus system:
- VE.Net to VE.Bus Converter
- Blue Power Panel 2
- Blue Power Panel GX
- VE.Bus to NMEA2000 interface
Combining with the Digital Multi Control, VE.Bus Multi Control or Phoenix Inverter Control is possible.
Victron Global Remote 2 and Victron Ethernet Remote