Instruction manual
4
Product Specications:
The drying trays and fruit leather tray and heating base are made with BPA
free plastic. The motor specications are as follows:
• 120V
• 60Hz
• 250W
Assembly & Use Instructions:
Once you have washed your Food Dehydrator as directed, follow the steps
below:
1. Place the heating base on a at surface, such as a table or counter top.
It is important that the ventilation holes in the bottom of the unit do
not get covered.
2. Do not set the dehydrator
on a carpeted surface or rug.
This could restrict proper
air circulation and cause
overheating and damage to
the unit, and result in a risk
of re. (See the diagram at
right for proper air ow in the
Dehydrator.)
3. Prepare your food items as
directed in the following sections of this manual.
4. Fill Trays with evenly cut or sliced food pieces. If food is not
prepared in equal thickness, it will not dry evenly and can mold
or spoil quickly.
5. Do not overll the drying trays. This could keep air from
circulating and lengthen the drying time signicantly. It is best to
place the food pieces close together, but
not touching or overlapping.
6. Stack the trays as shown in the diagram on
the right, with the tab on the tray above
resting on the small ‘block’ on the tray
below. This extended height allows the
air to ow freely around the food on each
tray to help the Dehydrator dry efciently.